My name is David Hudson.  I’m a third generation native Phoenician from an old family in the Phoenix area.  We are an old family.  We are very conservative. I come from an ultra-conservative right wing background.   For those of you who have heard of the John Birch Society, Barry Goldwater, these ultra right- wing Rush Limbaugh conservatives; that’s the area that I come from.  I’m not saying whether it is right or wrong but that is my  background.

I had no concept that I would ever be doing what I’m doing right now when I began this work.  In 1975-76 I was very unhappy with the banking system here in the United States.  I was farming about 70 thousand acres in the Phoenix area in the Yuma valley.  I was a very large, materialistic person.  I wasb farming this amount of ground.  I had a forty man payroll every week.  I had a four million line of credit with the bank.  I was driving Mercedes  Benz’s.  I had a 15,000 square foot home.  I was Mr. Material man.

In 1975 I was doing an analysis of natural products here in the area where I was farming.  You have to understand that in agriculture in the state of Arizona we have a problem with sodium soil.  This high sodium soil, which looks like chocolate ice cream on the ground, is just crunchy black.  It crunches when you walk on it.  Water will not penetrate this soil.  Water will not leach the sodium out of the ground.  It’s called black alkali.

What we were doing was going to the copper mines in the state of Arizona and buying 93% sulfuric acid.  For those of you who don’t know, the battery acid in your car is 40-60% acid.  This was 93% sulfuric acid; very, very high concentration.  We were bringing in truck and trailer loads of this sulfuric acid to my farm and I was injecting thirty tons to the acre into the soil.

I had no concept that I would ever be doing what I’m doing right now when I began this work.  In 1975-76 I was very unhappy with the banking system here in the United States.  I was farming about 70 thousand acres in the Phoenix area in the Yuma valley.  I was a very large, materialistic person.

 I was farming this amount of ground.  I had a forty man payroll every week.  I had a four million line of credit with the bank.  I was driving Mercedes  Benz’s.  I had a 15,000 square foot home.  I was Mr. Material man.

We were putting six inch ribbons on the ground that would penetrate about three or four inches into the ground.  When you irrigate (nothing will grow in Arizona unless you irrigate) the ground would actually froth and foam due to the action of the sulfuric acid.  What it did was convert the black alkali to white alkali, which was water soluble.  So within a year and a half to two years you would have a field that could actually grow crops.

In the work that I was doing with these soils, it is very important that you have a lot of calcium in the soil in the form of calcium carbonate.  The calcium carbonate would act as a buffer for all the acid that was being put on
the soil.  If you don’t have enough calcium the acidity of the soil goes down, you get a pH of 4-4.5 and it ties up all of your trace nutrients.  When you plant your cotton it will only get so tall then it won’t grow any more.

It’s very important when you are putting all of these amendments on your soil that you understand what is in your soil: how much iron is there, how much calcium is there and so on.

In doing the analysis of these natural products we were coming across materials that no one seemed to be able to tell us what they were.  We began to trace this material and we found that it seemed to come from a specific geological feature.  Whatever the problem with this material was we felt that the area where it was in greatest abundance would be the best place to study it.

We took the material into chemistry and we dissolved it and got a solution that would be blood red.  Yet when we precipitated this material out chemically by using a reductant of powdered zinc the material would come out as a black precipitant just like it was supposed to be if it was a noble element.  A noble element if you chemically bring it out of the acid it won’t re-dissolve in the acid.

So we precipitated this material out of the black and we took the material and dried it.  In the drying process we took a large porcelain funnel called a Butiner funnel about this big it had a filter paper on it.  This material was
about a quarter of an inch thick on top of the filter paper.  At that time I didn’t have a drying furnace or a drying oven so I just set it out in the Arizona sunshine which was about 115 degrees at 5% humidity so it really dried fast.

What happened was that after the material dried it exploded.   It exploded like no explosion I had ever seen in my life and I’ve worked with a lot of explosive materials.  There was no explosion and there was no implosion.   It was as if somebody had detonated about fifty thousand flash bulbs all at one time just poof.  All the material was gone, the filter paper was gone and the funnel was cracked.

So I took a brand new pencil that had never been sharpened and stood it on end next to the funnel and started drying another sample.  When the material detonated it burned the pencil about 30% in two but did not knock the pencil over and all the sample was gone.  So this was not an explosion and was not an implosion.  It was like a tremendous release of light.

It was like you set that pencil beside a fire place and after about 20 minutes you saw it was smoking on one side and burning in two.  That’s what the pencil looked like immediately after the flash.  Now this just had me baffled. 
What ever this stuff is it’s wild.  We found that if we dried it out of the sunlight it didn’t explode but if we dried it in the sunlight it exploded.

So then we took some of the powder that was dried out of the sunlight and we decided we were going to put it in what is called a crucible reduction. A crucible reduction involves taking a crucible (which is like a big drinking glass made out of porcelain) and you mix your powder with lead and all this flux and all and you heat it till the lead melts.  What happens is the metals that are heavier than lead stay in the lead and all of those that are lighter float out.  This is the basic premise of your fire assays which have been done for hundreds of years.

Now supposedly gold and silver will stay in the lead and all your other non heavy elements will come out of the lead.  This is the tried and true way of doing metals analysis.  Well this material  settled to the bottom of the lead just like it was gold and silver.  This material seemed to be denser than lead.  When we poured off the slag it would take everything but the noble elements, then we poured off the lead and this material came off as a constituency at the bottom of the molten lead.  It was separated from it. Yet when you take this material and put it on a bone ash cupel the lead soaks into the cupel and it leaves your bead  of gold and silver.  Well we did this and we got a bead that should have been gold and silver.

We took this bead for analysis to all the commercial laboratories and they said Dave there is nothing but gold and silver there.  Except I could take that bead and set it on a table and hit it with a hammer and it shattered like glass.  Now there is no known alloy of gold and silver that is not soft.  Gold and silver dissolve in each other perfectly and they form solid solutions and they are both very soft elements and so any alloy of gold and silver if that’s all that’s there is going to be soft and ductile.  You can flatten it out and make a pancake out of it.  Yet this material shattered like glass.  I said
something’s going on here that we are not understanding.  Something unusual is happening.

So what we did is we took these beads of gold and silver and separated them
chemically with the gold and silver out.  What we had left is a whole bunch of
black stuff.  When I took this black stuff to the commercial laboratories they
told me that it was iron, silica and aluminum.  I said this can’t be iron,
silica and aluminum.  First of all you can’t dissolve it in any acids or any
bases once it is totally dry.  It doesn’t dissolve in fuming sulfuric acid, it
doesn’t dissolve in sulfuric nitric acid, it doesn’t dissolve in hydrochloric
nitric acid.  Even this dissolves gold yet it won’t dissolve this black stuff.
I thought this material is really strange.  It just has to have an
explanation.  No one could tell me what it was.

Basically I went to Cornell University.  I said we are just going to have to
throw some money at this problem.  So I went and hired a Ph.D. at Cornell who
considered himself an expert on precious elements.  I suspected we were
dealing with precious elements.  I said I want to know what this is. 
I paid him to come out to Arizona.  He looked at the problem.  He said “we have a
machine back at Cornell that can analyze down to parts per billion”.   He said
“you let me take this material back to Cornell and I’ll tell you exactly what
you have, exactly”.  Unless it is chlorine, bromine or one of the lighter
elements, then we can’t analyze it.  But if it is anything above iron we will
find it.  When he got back there he told me it was iron silica aluminum.

I said “look doctor do you have a chemistry laboratory around here we could
borrow?”  He said “yes.”  I said “let’s go to the chemistry laboratory.” 
We worked in the chemistry laboratory all the rest of that day and we were able
to remove all the silica, all the iron and all the aluminum.  We still had 98%
of the sample and that was pure nothing.  I said “look I can hold this in my
hand, I can weigh it, I can performs chemistries with it”.  “I said that is
something”.  “I know that is something.”  “It is not nothing.”

He said “the absorption or emissions spectrum does not agree with anything we
have programmed into our instrument.”   I said “well that is something and I’m
going to find out what.”  And he said “Mr. Hudson why don’t you give us a $35
0,000 dollar grant and we’ll put graduate students to looking into it.”  Well
I had already paid this man about $22,000 because he claimed he could analyze
anything and he hadn’t.  He didn’t offer to pay any of my money back.  I said
“sir, I don’t know what you pay the people around here but we pay
minimum wage on the farm where I work and I can get a lot more
out of $350,000 than you can.” 
“So I’m going to go back and do the work myself.”

I came back to Phoenix totally disillusioned with academia.  I was not
impressed with the Ph.D’s.  I was not impressed with the people I had paid
money to.  I found out that it is just a big system where they worked the
graduate students to generate paper but they never say anything but the
government pays them for every paper they write so they get their money based
on the number of papers they turned out.  They all say the same thing they
just re-word it and turn out another paper.  It really is disillusioning when
you find out what academia is doing right now.

Fortunately I asked around the Phoenix area and I found out about a man who
was a spectroscopist.  He had been trained in West Germany at the institute
for spectroscopy.  He had been the senior technician for Lab Test company in
Los Angeles which builds spectroscopic equipment.  He’s the man who blue
printed them, designed them, constructed them then took them to the field and
then made them work.  I said here’s a good man.  This is not just a
technician.  Here is a man who knows how the machine works.

I went to him with a Soviet book that the fire assay man had given me.  It was
called The Analytical Chemistry of the Platinum Group Elements by Ginsberg.
It was published by the Soviet Academy of Sciences.  In this book, according
to the Soviets, you had to do a 300 second burn on these elements to read
them.

Now for those of you who have never done spectroscopy it involves taking a
carbon electrode that is cupped at the top.  You put the powder on that
electrode and you bring the other electrode down above it and you strike an
arc.  In about fifteen seconds the carbon at this high temperature burns away
and the electrode’s gone and your sample’s gone.    So all the laboratories in
this country are doing fifteen second burns and giving you the results.
According to the Soviet Academy of Sciences the boiling temperature of water
is to the boiling temperature of iron just like the boiling temperature of
iron is to the boiling temperature of these elements.

As you know from driving a car as long as there is water in the motor of your
car the temperature of that car engine will never hotter than the boiling
temperature of water until all the water is gone.  If you just heated the
water on the stove in a pan you know that pan never gets hotter than the
boiling temperature of the water till all the water is gone.  Once all the
water is gone the temperature skyrockets really fast.

As long as there is iron there the temperature of the sample can never get
hotter than the boiling temperature of the iron until all of the iron is gone
so you can then heat this stuff.  Now this is hard to fathom how something
with as high a boiling temperature as iron could be just like water to these
elements but it is.  So literally we had to design and build an excitation
chamber where argon gas could be put around this electrode so than no oxygen
or air could get in to the carbon electrode and we could burn it not for
fifteen seconds but for three hundred seconds.  According to the Soviet
Academy of Sciences this is the length of time we have to burn the sample.

We set up, we got the [PK blenders?], we got the standards, we modified the
machine, we did all the analysis for results, we did all the spectral lines on
this three and a half meter instrument.  That’s the spec for how big the prism
is which opens up the line spectrum.  For those of you who don’t know, most
universities have a one point five meter instrument.  This is a three and a
half meter instrument.  A huge machine.  It took up the whole garage area.  It
was about thirty feet long and about eight or nine feet high.

Anyway when we ran this material during the first fifteen seconds we got iron,
silica, aluminum, little traces of calcium, sodium maybe a little titanium now
and then and then it goes quiet and nothing reads.  So at the end of fifteen
seconds you are getting nothing.  Twenty seconds, twenty five seconds, thirty
seconds, thirty five seconds, forty seconds still got nothing.  Forty five
seconds, fifty seconds, fifty five seconds, sixty seconds, sixty five seconds
but if you look in through the colored glass sitting there on the carbon
electrode is this little ball of white material.  There’s still something in there.

At seventy seconds, exactly when the Soviet Academy of Science said it would
read, palladium begins to read.  And after the palladium platinum begins to
read.  And after the platinum I think it was rhodium begins to read.  After
rhodium ruthenium begins to read. After ruthenium then iridium begins to read
and after the iridium osmium begins to read.

Now if you’re like me I didn’t know what these elements were.  I had heard of
platinum, platinum jewelry, but what are these other elements.  Well there are
six platinum group elements in the periodic table not just platinum.  They
didn’t find out about them at the same time so they have been added one at a
time.  They are all elements just like iron, cobalt and nickel are three
different elements ruthenium, rhodium and palladium are light platinums and
osmium, iridium and platinum are the heavy platinums.

Well we came to find out that rhodium was selling for about three thousand
dollars per ounce.  Gold sells for about four hundred dollars an ounce.
Iridium sells for about eight hundred dollars an ounce and ruthenium sells for
one hundred and fifty dollars an ounce.

Then you say gee these are important materials aren’t they.  They are
important materials because in the world the best known deposit is now being
mined in South Africa.  In this deposit you have to go a half mile into the
ground and mine an 18 inch seam of this stuff.  When you bring it out it
contains one third of one ounce per ton of all the precious elements.

Our analysis, which we ran for two and a half years and we checked over and
over; we checked every spectral line, we checked every potential on
interference, we checked every aspect of this.  We created apples and apples,
oranges and oranges, bananas and bananas.  We wanted exact matches.

When we were finished the man was able to do quantitative analysis and he said
“Dave, you have six to eight ounces per ton of palladium, twelve to thirteen
ounces per ton of platinum, one hundred fifty ounces per ton of osmium, two
hundred fifty ounces per ton of ruthenium, six hundred ounces per ton of
iridium, and eight hundred ounces per ton of rhodium.  Or a total of about
2,400 ounces per ton when the best known deposit in the world is one third of
one ounce per ton.

As you can see this work wasn’t an indicator that these elements were there;
these elements were there and they were there in boucoups amounts.  They were
saying hey stupid man pay attention we are trying to show you something.

If they had been there in little amounts I probably would have contended with
this.  But they were there in such huge amounts I said golly, how can they be
there in these quantities and no one knew it.  Now you keep in mind, it wasn’t
one spectral analysis it was two and a half years of spectral analysis running
this material every day.  And the man actually sent me away when they read
because he couldn’t believe it either.  And he worked on it another two months
before he called me up and apologized to me and he said “Dave you are right.”
That is how skeptical he was about it.  He couldn’t apologize to me.  He is a
German researcher with German pride so he had his wife call and apologize to
me.

He was so impressed that he went back to Germany to the Institute of
Spectroscopy.  He was actually written up in the spectroscopic journals as
having proven the existence of these elements in the Southwestern United
States in natural materials.  It’s not journals that you would ever read but I
actually saw the journals, he was written up.

They had no idea where this stuff was coming from, how we were producing it,
what concentrations we had gone through or anything, they just had analyzed
this small amount of powder.  The crazy thing about it is, all we had done is
remove the silica and sent the other stuff in.  It was pretty unbelievable
numbers.  After we had come at this in every way we know how, to disprove it,
I decided all we have to do is throw money at this problem because money
solves everything, right?

So at 69 seconds I stopped the burn.  I let the machine cool down and I took a
pocket knife and dug that little bead out of the top of the electrode.  When
you shut off the arc it sort of absorbs down into the carbon and you have to
dig down into the carbon to get it out; this little bead of metal.

So I sent this little bead of metal over to Harlow Laboratories in London.
They made a precious metals analysis on this bead.  I get the report back “no
precious element detected”.  Now this was one second before the palladium was
supposed to start leaving.  Yet according to neutron activation, which
analyzes the nucleus itself, there were no precious elements detected.

This made absolutely no sense at all.  There had to be an explanation here.
Either this material was converted to another element or it’s in a form that
we don’t understand yet.  So I decided that I just had to get more information
on it.  I went to a Ph.D. analytical chemist, a man who was trained at
separating and purifying individual elements out of unknown material.  He was
trained at Iowa State University and he had a Ph.D. in metal separation
systems.  He’s the man that Motorola and Sperry used in the state of Arizona
to handle their waste water problems.

He has worked with every element on the periodic table with the exception of
four.  He has worked with all the rare earths, he has worked with all the man
made elements.  He has physically separated everything on the periodic table
with the exception of four elements.  Coincidentally I came to him to have him
separate six elements.  Four of those were the elements he had never worked
on.  He said “you know Mr.  Hudson, I have heard this story before.  All my
life, and I’m a native Arizonan too, I have heard this story about these
precious elements.  I am very impressed with the way you have gone about this:
with the systematic way you have approached it.  I cannot accept any money
because if I accept money from you I have to write you a written report.

All I have to sell is my reputation.  All I have to sell is my credibility.
I’m a certified expert witness in the state of Arizona in metallurgical
separation systems.  He said “Dave I will work for you at no charge until I
can show you where you are wrong.”  “When I can tell you where you are wrong
I’ll give you a written report.” “Then you will pay me sixty dollars an hour
for the time I spent.”  This would have come to about twelve to fifteen
thousand dollars.  If this gets rid of the curse; if this just gets the thing
answered once and for all it’s worth it.  It was for me at the time.  Do it,
get on with it.

Well, three years later he said “I can tell you it is not any of the other
elements on the periodic table.  We are educated; we are taught to do the
chemical separation of the material and then send it for instrumental
confirmation.”

The example I use is rhodium because it has a very unique color to the
chloride solution.  It is a cranberry color almost like the color of grape
juice.  There is no other element that produces the same color in chloride
solution.  When my rhodium was separated from all the other elements it
produced that color of chloride.  The last procedure you do to separate the
material out is to neutralize the acid solution and it precipitates out of
solution as a red brown dioxide.  That is heated under a controlled atmosphere
to 800 degrees for an hour and that creates the anhydrous dioxide.  Then you
hydro reduce that under a controlled atmosphere to get the element and then
you anneal away the excess hydrogen.

So when we did that, we neutralized the acid solution and precipitated it out
as a red-brown dioxide.  Which is the color it is supposed to precipitate.
Then we filtered that out.  We heated it under oxygen for an hour in a tube
furnace then we hydro-reduced it to this gray-white powder: exactly the color
rhodium should be as an element.  Then we heated it up to 1400 degrees under
argon to anneal away the material and it turned snow white.

Now this wasn’t expected.  This just isn’t what is supposed to happen.  So
what John did was he said “Dave, I’m going to heat it to the anhydrous
dioxide, I’m going to cool it down.  I’m going to take one third of the sample
and put it in a sealed vial.  I’m going to put the rest of the sample back in
the tube furnace and heat it up under oxygen, cool it back down, purge it with
inert gas, heat it back up under hydrogen to reduce away the oxides and the
hydrogen reacts with oxygen forming water and cleans the metal.  I’ll cool
that down to the gray-white powder.  I’ll take half of that and put it in
another sealed vial.  I’ll take the rest of the powder and put it back in the
furnace.  I’m going to oxidize it, and hydro-reduce it and anneal it to the
white powder.  Then I will put it into a vial and send all three vials to
Pacific Spectrochem over in Los Angeles, one of the best spectroscopic firms
in the U.S.

The first analysis comes back.  The red-brown dioxide is iron oxide. 
The next material comes back; silica and aluminum.  No iron present. Now just putting hydrogen on the iron oxide has made the iron quit being iron and now it has
become silica and aluminum.  Now this was a big sample.  We just made the iron
turn into silica and aluminum.  The snow white annealed sample was analyzed as
calcium and silica.  Where did the aluminum go?  John said “Dave my life was
so simple before I met you.”  He said “this makes absolutely no sense at all.”
He said “what you are working with is going to cause them to re-write
physics books to re-write chemistry books and come to a complete new
understanding.”

John gave me his bill, it was a hundred and thirty thousand dollars which I
paid.  But he said “Dave, I have separated physically and I have checked it
chemically fifty different ways and you have four to six ounces per ton of
palladium, twelve to fourteen ounces per ton of platinum, a hundred fifty
ounces per ton of osmium, two hundred fifty ounces per ton of ruthenium, six
hundred ounces per ton of iridium, and eight hundred ounces per ton of osmium.
The exact same numbers that the spectroscopist had told me were there. 
It was such an incredible number that John said “Dave, I’ve got to go to the natural
place where this stuff comes from and I’ve got to take my own samples.  So he
went up and actually walked the property and took his own samples, put it in a
bag, brought them back to the laboratory, pulverized the entire sample and
then started doing the analysis on what is called the master blend sample
which represented the whole geology and he got the same numbers.

We worked on this from 1983 until 1989.  One Ph.D. chemist, three master
chemists, two technicians working full time.  Using the Soviet Academy of
Sciences, the U.S. Bureau of Standards-Weights and Measures information as a
starting point we literally learned how to do qualitative and quantitative
separations of all of these elements.  We learned how to take commercial
standards and make them disappear.  We learned how to buy rhodium tri-chloride
from Johnson, Mathew & Ingelhardt as the metal and we learned how to break all
the metal-metal bonding until it literally was a red solution but no rhodium
detectable.  And it was nothing but pure rhodium from Johnson, Mathew &
Ingelhardt.

We learned how to do this with iridium, we learned how to do it with gold, we
learned how to do it with osmium, we learned how to do it with ruthenium.  And
what we found when we actually purchased a machine called high pressure liquid
chromatography.

And for your information this person named John [Sycapose?] was the man who
actually wrote his Ph.D. thesis at Iowa State University on how to build this
instrument.  He conceptualized building this instrument back in 1963-64.

After he graduated some of the graduate students there took that technology
and developed it and eventually Dow Chemical came in and bought it.  Dow went
ahead and commercialized it and now it is the most sophisticated chemical
separation that the world has.  It’s computer controlled, all high pressure
and you can do very precise separations with it.  Because this is the man who
conceptualized, designed it, told them what the limitations would be,
eventually, on it he was the ideal man to take the technology and perfect it.

So we were able to use their basic technology and develop a separation system
for taking the rhodium tri-chloride (we actually separated five different
species in the commercial rhodium tri-chloride).  What this is all about is
the word “metal” is like the word “army”.  You can’t have a one man army.  The
word metal refers to a conglomerate material.  It has certain properties,
electrical conductivity, heat conduction and all these other aspects of it.

When you dissolve the metals in acid you get a solution that is clear without
solids.  You assume it’s a free ion but when you are dealing with Nobel
elements it’s still not a free ion, it’s still what is called cluster chemistry.

Back since the 1950′s there has been a whole area of research in colleges
called cluster chemistry; catalytic materials.  But what happens is the metal-
metal bonds are still retained by the material.  So if you buy rhodium tri-
chloride from Johnson, Matthew and Engelhardt you are actually getting Rh 12
Cl 36 or Rh 15 Cl 45.  You really aren’t getting RhCl 3.  There is a
difference between the metal-metal bonding material and the free ion.  And so
what you are buying when you buy it is cluster chemistry; you are not getting
free ions.

When you put it in for analytical instrumentation to analyze it, it is
actually analyzing the metal-metal bonds of the cluster.  It is not really
analyzing the free ions.

I heard that General Electric was building fuel cells using rhodium and
iridium.  So I made contacts with their fuel cell people back in Massachusetts
and traveled back there to meet with them.  They had three attorneys meet with
us and the GE people were there.  The attorneys were there to protect the GE
people because a lot of people say they have technologies and they meet with
them then after the meeting they sue them claiming that GE stole their
technology.  Then to defend themselves GE has to divulge what their technology
really is.  So GE is very skeptical when you say that you have something new.
They bring in their high faluting attorneys to really screen you.

After about an hour they said “these guys are for real.  You attorneys can
leave”.  Because they had had the explosions also.  They knew that when they
buy the commercial rhodium tri-chloride that it analyzes very well.  But to
make it ready to go into their fuel cells they have to do effusions on it
using salt effusions where they melt the salt and put the metal in with it to
disperse it further.  They know when they do that that the metal doesn’t
analyze as well any more.

So when we told them that we had material that didn’t analyze at all they
could conceive how this was possible.  They had never seen it but they said we
are interested.  Now these are the people who build analytical
instrumentation, GE.  They said “Dave, why don’t you just make a bunch of
rhodium for us and send it to us and we’ll mount it in our fuel cell
technology.  [What is the mechanism of conversion of monatomic rhodium to
metallic rhodium in these fuel cells?]  We’ll see if it works in a place where
only rhodium works.  No other metal has ever been found which will perform the
catalysis in the hydrogen evolving technology of the fuel cell other than
rhodium and platinum.  And rhodium is unique compared to platinum because
rhodium does not poison with carbon monoxide and platinum does.

They said “Dave we will just run it to see if it’s a hydrogen evolving
catalyst and if it is then we will see if it is carbon monoxide stable and if
it is then it’s rhodium or it’s a rhodium alternative.  So we worked for about
six months and refined that amount of material and we re-refined it and re-
refined it.  We wanted to be absolutely sure that this was really clean stuff.
We didn’t want any problems with this.  We sent it back to Tony LaConte at GE.

GE by that time had sold their fuel cell technology to United Technologies who
already had a fuel cell technology.  So all the GE fuel cell people had to go
work for United Technologies and since United Technologies already had their
in house people the GE people were not integrated into the existing teams.  So
all the GE people were junior people.  They weren’t senior any more.  So after
a certain period of months they all quit and left United Technologies.  Well
Jose Geener, who was the head of fuel cells at United Technologies, quit also
and went to set up his own firm called Geener Incorporated in Waltham
Massachusetts.  Tony and all the GE people went with him.

By the time our material gets there they’ve their own company set up in
Waltham Massachusetts so we contract with them to build the fuel cells for us.
When our material was sent to them the rhodium, as received, was analyzed to
not have any rhodium in it.  Yet when they mounted it on carbon in their fuel
cell technology and ran the fuel cell for several weeks it worked and it did
what only rhodium would do.  And it was carbon monoxide stable.

After three weeks they shut the fuel cells down and they take the electrodes
out and sent them back to the same place that said there was no rhodium in the
original sample and now there is over 8% rhodium in the rhodium.  What happens
is it begins to nucleate on the carbon.  It actually begins to grow metal-
metal bonds.  So now there was metallic rhodium showing on the carbon where
before there was no rhodium.

So these GE people said “Dave, if you are the first one to discover this, if
you are the first one to explain how to make it in this form, if you are the
first one to tell the world that it exists, then you can get a patent on
this.’” I said “I’m not interested in patenting this.”  Then they told me that
if someone else discovered it and patented it, even though I was using it
every day, they could stop me from doing it.  I said “well, maybe I should
patent it.”  So in March of 1988 we filed U.S. and world wide patents on
Orbitally Rearranged Monatomic Elements.

Now that is a mouth full, so to make it short we called it ORMES.  You have
ORME gold, ORME palladium, ORME iridium, ORME ruthenium, ORME osmium or ORMES.

When we were doing this patent procedure the patent office said “Dave, we need
more precise data,  we need more exact data, we need more information about
this conversion to this white powder state.  So one of the problems we had is
when you make this white powder and you bring it out into the atmosphere, it
really starts gaining weight.  I’m not talking about a little bit of weight,
I’m talking about 20-30%.  [This is not explained elsewhere.  What does it
mean?]  Now that normally would be called absorbtion of atmospheric gasses;
the air is reacting with it and causing weight gain but not 20 or 30 percent.

But nonetheless we had to answer the patent office.  We had to come up with
exact data for the patent office.  So what we did is use this machine called
thermo-gravimetric analysis.  This is a machine that has total atmospheric
control of the sample.  You can oxidize it, hydro-reduce it and anneal it
while continually weighing the sample under a controlled atmosphere.
Everything is all sealed.  We were getting short on funding and couldn’t
afford to buy one so we leased one from the Bay Area from [Berean]
Corporation.  They sent it in to us and we set it up on computer controls.

We heated the material at one point two degrees per minute and cooled it at
two degrees per minute.  What we found is when you oxidize the material it
weighs 102%, when you hydro-reduce it it weighs 103%.  So far so good.  No
problem.  But when it turns snow white it weighs 56%.  Now that’s impossible.

When you anneal it and it turns white it only weighs 56% of the beginning
weight.  If you put that on a silica test boat and you weigh it, it weighs
56%.  If you heat it to the point that it fuses into the glass, it turns black
and all the weight return.  So the material hadn’t volitized away.  It was
still there; it just couldn’t be weighed any more.  That’s when everybody said
this just isn’t right; it can’t be.

Do you know that when we heated it and cooled it and heated it and cooled it
and heated it and cooled it under helium or argon that when we cooled it it
would weigh three to four hundred percent of it’s beginning weight and when we
heated it it would actually weigh less than nothing.  If it wasn’t in the pan,
the pan would weigh more than the pan weighs when this stuff is in it.

Keep in mind these are highly trained people running this instrumentation and
they would come in and say take a look at this.  This makes no sense at all.
Now this machine is so precisely designed and controlled that they actually
have a magnetic material that you can actually put into this machine that is
non magnetic when it goes in the machine and at 300 degrees it becomes
magnetic.  It actually is a strong magnet.  Then after you get up to 900
degrees it loses it’s magnetism.  And you can actually see if the
interreaction of the magnetism with the magnetic field of the heating element
caused any change in weight.

The heating element is bi-filar wound.  It goes round and round the sample
then you reverse it and wind it right back up so all the current runs against
itself all the time.

So when a wire flows electricity there is a magnetic field that forms around
it but then you run the wire right next to it going in the other direction it
forms a magnetic field in the other direction and the idea is that the two
fields will cancel.  Now this is the kind of wiring that is used in a
television to cancel all magnetic fields.

The designers of this machine wanted to eliminate all magnetic field aspects
to this.  When we put the magnetic material in the sample and ran it with the
magnetic material there was no response at all; there was no change in weight
when the material became magnetic or lost it’s magnetism.  Yet when our
material is put in there and it turns white it goes to 56% of its beginning
weight.  If you shut the machine off and let it cool it is exactly 56%.  If
you heated it, it would go less than nothing and if you cooled it it would go
three to four hundred percent but it always goes back to a steady 56%.

Now we contacted [Berean] in the Bay Area and said “look this just doesn’t
make any sense”.  There’s something wrong with this machine; I mean something
isn’t right.  Every time we use the machine it works fine unless we make the
pure mono-atomic material and when we do it turns snow white and doesn’t work
correctly any more.  And [Berean] looked over our results and said “you know
Mr. Hudson if you were working with the cooling of the material we would say
it is superconducting.  But inasmuch as you are heating the material we don’t
know what you’ve got.”

I decided well, I have had to learn chemistry and I have had to learn physics
and now I’ve got to learn the physics of superconductors.  So I borrowed a
bunch of graduate books on superconductivity and I began to read about
superconductors.

One thing we did is we took our white powder; now if this is a superconductor
we should be able to put this white powder down on the table and should be
able to hook up a volt meter here to it.  You know your volt meter has got two
electrodes and you put it on a wire and turn on the battery pack and it tells
you the resistance in the wire.

Well if you touch the powder with one electrode on one end and the other on
the other end and turn on the electricity you just figure the needle is going
to go boing, just like this, right?  Perfect conductivity, right?  Nothing,
zilch, nothing; no conductivity at all.  So we think what’s going on here?

So what we found out is that the definition of a superconductor is that it
does not allow any voltage potential or any magnetic field to exist inside the
sample.  So by definition a superconductor will not allow any voltage
potential to exist inside the sample.  To get electricity off of a wire
requires voltage and to get electricity back on the wire requires a voltage.
So it cannot receive electricity from a wire, it cannot receive the energy of
the superconductor back on the wire without voltage.

So now I know your question is “so what the heck good is this stuff?”  If you
can’t get energy into it and you can’t get energy back out of it, what the
heck good is it?  Well what you come to find out is that in the superconductor
there is a single frequency of light, just like a laser, that is flowing
perpetually inside the superconductor.  And when it flows inside the
superconductor it produces around it what is called a Meissner field which is
unique to superconductors.

A Meissner field excludes all external magnetic fields from the sample.  What
color must it be?  It has to be white.  Anything that excludes all light from
the sample has to be white.  Anything that absorbs all light has to be black.
[How does this statement square with the flash in the pan from exposure to
sunlight?]  If it reflects all light it has to be white; now I’m talking about
a pure single element superconductor.  It has to be white when it is
superconducting.  [Check this out]

What you have to do is you have to take a radio frequency transmitter and you
have to resonance frequency tune the superconductor to match the frequency of
the wire.  [More likely tune the wire to match the superconductor].  So the
wire now is oscillation with its electron waves exactly the same as the
superconductor.  At that point the electronic pair can go on the
superconductor with no push at all.  Because electrons are continually moving
over here on the wire and they are seeking the path of least resistance.  And
so when you have them in perfect synchronization with the superconductor they
go on with no push at all as pairs.

Now this takes a little explaining because one spin one half electron plus one
spin one half electron are two particles.  Yet when these two particles become
perfectly paired as mirror images of each other they lose all particle aspects
and they become nothing but pure light.  This doesn’t make sense either, does
it?  But that’s the way it is.  Spin one half plus spin one half gives you
spin one which now is pure light.  Trust me it is so.  So they can’t go on as
individual electrons, they go on as light.

Now the crazy thing about electrons is that one electron can exist in one
space time and if it moves to another space time it gives off light or absorbs
light.  It’s moving from one space time to another.  Now we have light, which
is two electrons.  Light doesn’t exist in any space time.  You can put 50
billion lights all in the same space time and it is OK.

Now we don’t have a conductor.  A conductor you put electricity on the wire,
you got to take the electricity off or it won’t flow.  You’ve got to ground
it, right?  With a super conductor it’s not.  It can go on and go on and go on
and go on…and it doesn’t have to come off.  Now if you want to take it off
you have to put a wire next to it and you have to resonance frequency tune the
wire to match the superconductor.  And when it’s in perfect harmony you apply
a voltage and poof off goes the energy.

So if you literally can make a superconductor that stretches from Portland to
New York City and you put energy on over here for two or three or four days.
You don’t have to take it off over there. It’s ok you can keep putting it in.
And when they want it in New York they can resonance frequency tune the wire,
apply voltage and suck it out.  It gets a free ride from Portland all the way
to New York.  On this quantal wave of the superconductor, as light not
electricity.

How do you measure it if it has no voltage in it?  How is it possible to get a
machine that can measure this light?  And guess what, it can’t be done.  Cause
every piece of instrumentation man has ever figured out always uses a
differential it must reflect and yet a superconductor has no voltage.  You
literally start the superconductor flowing by applying a magnetic field.  It
responds to the magnetic field by flowing light inside of it and building a
bigger Meissner field around it.

You can put your magnet down and walk away.  You come back a hundred years
later and it is still flowing exactly the same as when you left.  It doesn’t
ever slow down.  It excludes, not 99.9999, it excludes 100.000000 of all
external magnetic fields.  There is absolutely no resistance in the sample; it
is perpetual motion.  It runs for ever and ever and ever and ever.

The Russian physicist Sakarov said in the 1960s that we are looking for
gravity and we are never going to find it as a magnetic field.  Gravity is
what is produced when protons, neutrons and electrons inter-react with the
vacuum energy.  That energy that is everywhere in the universe, timeless.
That energy that is there like the ether.  When you pump out all heat and all
matter; everything, there still is energy there.  It’s called the vacuum
energy.  When the protons, neutrons and electrons inter-react with that energy
they produce gravity.  If there is no matter, there is no gravity.
Interesting theory.

Everyone kind of ignored it for a while.  Then this fellow by the name of Hal Puthoff
down in Texas who began life over here in the Bay Area in California
doing distant viewing experimentation.  Now he’s working down in Austin,
Texas.  [H. E. Puthoff works at the Institute for Advanced Studies at Austin
in Austin, Texas.]  And he actually developed the mathematics for Sakarov’s
theory of gravity.  He published this in 1993 in one of the top science
journals.  [It was actually published in the March 1, 1989 issue of Physical
Review A.  The paper is titled "Gravity as a zero-point-fluctuation force" by
H. E. Puthoff.]

In the mathematics (he actually does all his mathematical calculations) it
figures out that when matter begins to react in two dimensions, as opposed to
inter-reacting in three dimensions, (which by definition a superconductor is a
resonance coupled quantum oscillator resonating in two dimensions, not three
dimensions) he comes up with the mathematics which shows when it begins to
inter-react in two dimensions that it should theoretically loose four ninths
of its gravitational weight.  Did you know that five ninths is 56%, exactly.

So I decided that I’ve got to go down and see Hal Puthoff.  I’ve got to take
all my data and go down and see Hal Puthoff.  I said “Hal, we have the
experimental confirmation that, in fact, your mathematics are absolutely
correct.  In addition Sakarov’s theory of gravity is absolutely correct.
Because this material only weighs 56% when it goes to the superconducting
state.  And Hal Puthoff says “Dave, you do realize that gravity is what
determines space/time.  And he said “Dave, when this material only weighs 56%
of it’s true mass you do realize that this material is actually bending
space/time.”  Now if you think about this it seems correct.  He said “Dave,
what we really need is a material that totally bends space time.”  “A material
that has no gravitational attraction at all.”  Less than zero.  It’s what he
called exotic matter in his papers.  I said “Hal, do you realize that if you
heat this material it has no gravitational attraction at all?”

I’ve been reading papers on the vacuum energy.  Do you know that there is an
overlap between the thermal spectrum and the zero point spectrum; the two of
them overlap.  And so if you heat something it should inter-react with the
zero point energy.  Well this material because it was resonating in two
dimensions, when you heat it it literally loses all gravitational attraction.
You know what Hal Puthoff said to me?  He said “Dave at that point you
shouldn’t be able to see the material.”  I said “correct, you can look in the
pan, through the quartz tube and there is nothing in the pan.  But the pan
isn’t weighing what it would weigh if the stuff wasn’t in it.

Now I had mistakenly assumed that the material was just resonating at a
frequency we didn’t perceive.  He said “Dave, theoretically it should be
withdrawing from these three dimensions.”  ” It should not even be in these
three dimensions.”  I said “wow.”

He said “Dave, you have to devise an experiment where you can do this: while
it is not there, pass an arm through the sample pan.”  “So if it is there and
resonating at a frequency that you don’t perceive you knock it out of the
pan.”  Because when you cool it back down and it begins to reappear it always
appears in the same shape it was in before it left.  And he says “if it’s
there you’re going to knock it out of the pan, then when you cool it down,
it’s going to return back in exactly the place it was before.  That’s proof
that it left these three dimensions.”  And he said “Dave, if you do that you
will never ever want for money.”  Do you think a stealth plane is really
important?  What happens when it can literally disappear?

Now, what are some of the other aspects of a superconductor?  You see in 1988
I not only filed a patent on ORMES I filed a patents on S-ORMES.  The resonant
coupled quantum oscillating system of many atoms of these ORMES.  I have 11
patents on ORMES and another 11 patents on S-ORMES.  I have 22 patents.

What are some of the other aspects of a superconductor?  A superconductor; how
do you prove it’s a superconductor?  You literally take a constant magnetic
field and you pass the material into the constant magnetic field.  If it’s not
a superconductor if you apply a magnetic field you get positive inductance.
If you graph it, applied magnetic field vs. Inductance.  Magnetic field vs.
Inductance. [DH waves hands depicting a graph]  If it’s a perfect insulator,
you’ll run totally parallel.  No matter how much magnetic field you apply, no
inductance.  If it’s a perfect conductor, just the littlest amount of magnetic
field on a perfect conductor will go straight up.  So between here and here
some place, most metals graph about like this.

If it’s a superconductor as you apply a magnetic field it goes negative.  It
literally eats the magnetic field.  It feeds on the magnetic field and takes
it inside itself.  Negative inductance in a positive applied magnetic field is
the proof of a superconductor.

In other words if you had a machine that was a superconductor when it passed
by ordinary power lines, it would cancel the voltage potential of the power
lines.  Or if it passed by a home that had electric appliances it would
literally turn them off and cause them to flicker and go off.

Do you realize that if you had a machine that would do that, it could
literally move in space time is what Hal was saying?  That it could disappear
and reappear in space time.  It could withdraw from these three dimensions
into a fifth dimension where there is no distance, and there is no time
between here and other star systems and then reappear out of that in that star
system.  Have you ever heard of anything that does that?

Anyway, the material is very very important.  The material and the way it
works is very very important.  Because we are talking about controlling
gravity and we are talking about controlling space/time.

Now let me give you an analogy.  If, if it is possible for me to shrink your
molecular body down small enough, miniaturization that would make you so tiny
that you could climb inside of an atom, you’d be down in the world of the
quanta where there is no time forward and there is no time reverse: everything
is interchangeable.  There is no time as we know it.  You would become an
immortal.  You literally could live forever in the world of the quanta.

A superconductor is billions and billions and billions of atoms all acting
like one big macro atom.  And so literally you make yourself a vessel that you
can climb inside of that superconducts and you energize it and you exclude all
external magnetic fields including gravity.  And you are now in this world but
you are not of this world.  Hear me.  In this world but not of this world.
And literally by just heating it you can literally disappear from this space
time.  Just like that, gone.  Now you will still be able to see everybody
there, they just can’t see you any more.  It’s like being above the water and
looking down in the water at the fish.  You’re not in their world.  But you
can see them.

[Someone from the audience interrupts with a question.]  “But you wouldn’t
have any thoughts either because they produce electromagnetic fields.”  [Big
silence from Dave Hudson. Then person from audience says]  “You would just
have pure awareness.” [Dave Hudson recovers by saying] “That is correct.”  As
you can see this becomes very philosophical very quickly.  When you come to
understand as we did that literally we decided well gee if we have this
analytical capability, and we can quantitatively and qualitatively analyze
this stuff where else is it?

So we went down to A. J. Bayless and got ourselves some cow’s brains and some
pig’s brains.  We carborized these brains in fuming sulfuric acid.  That was a
really raunchy thing to do but it was the only way we knew to do it.  We
weren’t organic chemists, we were inorganic chemists so we destroyed the
carbon, carborized it, added nitric-nitric-nitric acid, kept taking it down to
fumes of sulfuric more nitric, fumes of sulfuric, more nitric till we got
rid of all the carbon.  Then water, water, water till we got rid of all the
nitrous compounds.  Then we did a metal sulfate analysis.  Did you know that
over five percent by dry matter weight of the brain tissue is rhodium and
iridium in the high spin state?

Did you know that the way cells communicate with each other is by
superconductivity?  That the U.S. Naval Research Facility knows that the way
cells communicate with each other is by superconductivity?  That they have
actually measured it using SQUIDS?  Superconducting Quantum Interference
Devices with a superconducting ring around the body.  And they have seen by
this procedure that literally light flowed between cell to cell to cell to
cell.  Did you know that your nerve impulses are not electricity that they
travel closer to the speed of sound than they do to the speed of light?  And
electricity travels closer to the speed of light?  Do you know what speed the
superconducting wave travels?  The speed of sound.  This, in fact, is what is
in your body that we call the consciousness.  It’s what separates you from a
computer.

It literally is the light of life.  This is that part of your body that has
been there all of this time, that scientists can’t find because their
instruments can’t see it.  They call it carbon because it has no absorption or
emission spectra and they assume therefore that it is carbon when, in fact, it
isn’t carbon.  That there are 11 elements that it could be but primarily
rhodium and iridium are the elements that are in your body right now.  And
that literally they resonance connect and literally flow the light of life
perpetually in your body.  And around your body you have a non polar magnetic
field which is called the Meissner field or they refer to it as the aura.

That literally these are the spirit atoms in your body.  These are the atoms
that are in resonant harmony and resonating with the vacuum energy.  And the
vacuum energy is another dimension where there is no time. Everything that
ever existed and everything that ever will exist is registered in the vacuum.
And I will tell you now, my friends, that when you meet your God, you will
meet him in the vacuum.  That is where all matter came from, that is where all
matter originated and that is where everything is recorded.  And your
connection is through these resonant oscillators that are in quantum resonance
with the vacuum energy.  That is what brings the light of life from the world
of the quanta up into the macro body you call your own physical being.

These atoms, in a macro state and dried, look like a white powder.  But
actually if you look at them under a microscope they look like glass.  You can
actually heat the white powder to 1160 degrees under a vacuum and it forms a
glass just like that window glass.  Another form the element can exist in.

When you come to understand that each of these atoms is resonating with the
vacuum energy.  You can’t harness a single atom.  You can’t put reins on it
and say work for me; this perpetual motion machine.  But when one atom is
resonating back and forth in two dimensions it creates a quantile wave that
comes off of it.  The next atom nestles in that wave and perpetuates the wave.

The atoms are actually too far apart to have any chemistry and yet they are
sitting at a distance resonating in perfect unison, harmony.  The energy that
literally rolls around one atom for ever and ever and ever: did you ever ask
yourself why an atom never runs down?  It is because it is dipping into the
zero point energy all of the time.  But now you have each atom in resonant
harmony with each other; each atom dipping into the zero point energy. 
So now you’ve got billions and billions and billions of them doing it for you.
So what you now have is a perpetual motion machine.  You have something that
literally is running perpetually on zero point energy.  You actually can build
a ring of this material and it will flow and respond to the earth’s magnetic field.

For example, did you know that a single element superconductor, a type one
superconductor, will literally respond to a magnetic field of two times ten to
the minus fifteenth ergs?  And do you know that there is ten to the eighteenth
power ergs in a gauss?

And the earth’s magnetic field, that the compass aligns with is about point
five gauss?  So an erg is the measure of the magnetic field around one
electron. And a superconductor responds to a magnetic field of two times ten
to the minus fifteenth ergs?

Gosh.  Literally, when you think; it registers.  So when you are working with
this material your thoughts are registering in the material.

In fact, some of you women will get upset with me when I say this but we
actually came to know these as female elements.  Cause what we did is we said
“you know we’re going to flip these things.  We’re just going to overcome
these things.  Cause if you just put enough energy to them you can make them
do what you want, right?  Sure.  We purchased what is called an arc furnace.
We took about thirty grams of this white powder and we put it in the furnace.
This furnace had an insulated crucible; it had a copper crucible in it with
water all around it to keep it cool.  You bring a lid to set down on top of it
and there’s a tungsten rod that hangs down in it.  And it actually runs a
little arc welder which you strike from the tungsten electrode to the copper.

And in this arc you sit there and you stir with the electrode back and forth,
back and forth till you literally melt everything that is there.  Now what we
did was we pumped out all of the air, we back filled it with helium gas, for a
plasma gas, and we struck the arc.  It went bzzp, like that and shut off.  We
opened up the arc furnace, no tungsten electrode.  Now this tungsten electrode
is about the size of my thumb.  Tungsten is the filament material that they
make light bulbs out of.  The people who built this furnace said we could use
it for thirty five to forty times with no deterioration of the electrode.  We
could burn it for minutes and minutes and minutes and minutes.  We didn’t even
get a second out of this thing.  So we sent to the manufacturer, got another
electrode put it back in it, put back on, closed it back up, vacuumed the air
out, put in the inert gas, struck another arc, bzzp, shut off.  Opened it up
again and the tungsten electrode is all molten into this powder.

What we found when we analyzed the powder after we did this, it wasn’t the
same element it was before we did this.  And what we also found is that there
was an amplification of heat about two thousand times.  It was not chemical
heat, it was nuclear heat.  What we found is all the wiring in the laboratory
was beginning to crumble and fall apart.  You could go up to copper wires and
do that and they would just go to powder.

The glass beaker sitting in the laboratory near the furnace was getting full
of little air pockets in the glass and when we would pick them up they would
fall apart.  And that’s radiation damage.  There is no other explanation for
it.  I’ll show you tomorrow that Berkeley-Brookhaven has confirmed that this
is 25,000 electron volt photons.  [I don't remember being shown this]  Gamma
level radiation comes out of these high spin atoms when you throw too much
energy at them.  So like all females if you tell them you will force them you
will get absolutely nothing, but if you give them what they want, they will
give you what you want.  So you cater to these elements; you don’t fight these
elements.  These elements are alive.  And what you have to do is give them the
chemistries that they want, cooperate with them, coerce them, give them what
they want and they will literally go back to the low spin state and you can
make them into metals, or you can use them in the high spin state.

Now everything was pretty interesting now till my uncle came up with this book
in 1991 called Secrets of the Alchemists.  I said I’m not interested in
reading about alchemy, this is when the church was involved in it and
everything, this was all perverted, I’m not interested in that, I want to know
about chemistry and physics.  He said “Dave, it talks about a white powder of
gold.”  I said “really?”  And so I began to look into alchemy.  And the
philosopher’s stone, the container of the light of life was the white powder
of gold.

Now I said “is there a chance that this white powder of gold that I have,
could it be the white powder of gold they’re talking about?  Or is it possible
that there is two white powders of gold?  Now the description says it is the
container of the essence of life; it flows the light of life.  Well that we
had proven.  It’s a superconductor.  It flows the light that is in your body.
They claimed that it perfects the cells of the body.

Well I can show you tomorrow Bristol-Myers-Squib research that shows that this
material inter-reacts with DNA, correcting the DNA.  All the carcinogenic
damage, all the radiation damage, all is corrected from these elements in the
presence of the cell.  They don’t chemically inter-react with it, they just
correct the DNA.

I really became intrigued with this stuff.  What would happen if we give this
material to people?  It’s not metal-metal bonding so it doesn’t have heavy
metal properties.  So first of all we got a golden retriever and gave the
material to the golden retriever.  This golden retriever had tick fever,
valley fever and a large abscess here on his side.  And none of the
veterinarians could find any medicine that would get rid of it due to the
combination of all three diseases.  And they just gave up; they weren’t going
to cure him.  We began giving him one cc injections of one milligram of the
white powder.  One shot in the tumor and one shot in the blood stream.  After
a week and a half the tick fever was gone, the valley fever was gone, the
tumor has shrunk down and disappeared.   So we stopped the injections.  About
a week later it starts coming back again.  So we start giving the injections
again and it shrunk back down again.  This time we continued about a week
longer and then when we stopped it never came back.  The dog felt great.

So then the doctor we were working with said you know this is really
incredible stuff.  He said you know I have an assistant that works in my
doctor’s office who is a day or two away from death with aids.  He is being
fed intravenously right now.  He can’t speak, he can’t dress himself, he is
dying.  So he said “I’m going to start giving him just a little bit of this
material and see what happens.  A week and a half later he had pulled out all
the feed lines out of his arms, he was feeding himself normally, getting
dressed on his own, just doing great.  A month and a half later he was on an
airplane going back to a family wedding in Indiana and nobody even knows he
has aids.

This doctor says “Dave, this is like a magic material.”  So he got a patient
who had KS; Karposi Sarcoma which is the cancer you get all over your skin.
This man had over thirty lesions all over his body and we began to give him
one milliliter injections into his blood stream.  After a month and a half
there was no more active KS on his body.  One milligram per day!  Now if you
are familiar with KS there is only one treatment and that is radiation
treatment.  And after a while you get the maximum amount of radiation and they
have to discontinue the treatment, then you get worse and die.  And this
totally got rid of KS lesions.

Then we started working with another patient who was actually not gay.  This
woman had received the aids virus in an invitro fertilization that was done
down at the University of Arizona.  There were ten women who received the
semen from this patient who had the HIV virus.  She was the only one who got
aids.  She had it for 11 years.  She was really starting to go down hill.  Her
white blood cell count and her T cell count were really classic.  We gave it
to her orally for the first time and basically there was no change in her
white blood cells and her T cells.  Now when we give it by injection the white
blood cell count goes from 2200 to 6500 in an hour and a half.  Unbelievable.

When we take it orally nothing happens to the white blood cell count.  Which
is the only analytical battle we have available.  After a month she said “I
want the injection; I want to see this increase my white blood cell count.”
So we prepared her a shot and she took the material by injection.  At the same
time we gave her the shot, we pulled blood samples and sent them to [Noing?]
Laboratories in southern California for an infected virons per milliliter of
blood analysis.  She took the first inject ions.

She got high fevers, just like everyone does, so we said cut it in half.  She
cut it in half, (actually the doctor cut it in half) the next day she took it
and she went into seizures and she died.  I just found out from a man in San
Francisco that people who have taken AZT; that AZT can cause brain lesions and
Hodgkin’s lymphomas in the brain.  Anything that dramatically stimulates the
immune system can cause them to go into seizures.  And so we don’t take
someone with AZT and give them the injections.

By that time we got our analysis back from [Noing?] Laboratories and it said
the infected viron count was so low that this woman shouldn’t even know she
had aids.  Now we didn’t do an analysis up front so we decided well we’ll
start giving this to people after we do a lab analysis.  We worked with a man
who had an infected viron count of 57,000.  He was so weak that he could
hardly walk; he used a cane.  The doctor said he gave him two to three weeks
to live.  He took this material orally and it took about 60 days to begin to
drop the infected viron count.  After 60 days it went down 30% every thirty
days.  By the end of seven months it was so low they couldn’t even detect it
any more in his blood.  And that’s taking 50 milligrams per day orally.

Now do understand, I’m not a doctor.  I have no interest in becoming a doctor.
What I wanted to know is, is it possible that this stuff works?  That is all
my interest was.  There was one doctor in North Phoenix that I gave two
bottles of the dried material to and he gave it to two cancer patients.  One
was forty two years old and the other was fifty seven years old.  They both
had breast cancer.  The forty two year old woman had had her breast removed
two years earlier and had extensive radiation treatments.  After two years she
was having pain in her neck, pain in her ribs. She went to a chiropractor that
couldn’t help her. She finally ended up with an oncologist who said she had
cancer in her neck, her shoulder, her back, her spine, and your ribs.  He said
it is stage four, get your affairs in order.  We can give you chemo-therapy
but you are going to die.

The woman went to this doctor.  He gave her these capsules which was a month
and a half worth of pills.  She took this material, at a hundred milligrams,
for a month and a half.  At the end of the month and a half she went back to
the oncologist.  She had no cancer anywhere in her body.  I didn’t even know
who the woman was.  I had nothing to do with giving her the material.  I get
this phone call and this woman says “Mr. Hudson, I don’t know who you are or
what this material is, but it is really fantastic material.  And she told me
the story.

The fifty seven year old woman it apparently didn’t work on.  We were then
back at the University of Chicago having cancer studies done with mice.  And
what we found is about half the mice it killed of cancers but the other half
the cancers grew faster.  But at the end of the study the cancer researchers
injected the mice with estrogen.  Which should have caused the cancers to even
grow faster.  Instead as soon as the estrone hit their bodies; within twenty
four hours all the cancers were gone.  And so what I suggest to people right
now is anyone who is over forty years of age I understand should consider
taking DHEA or some female hormone because in treating breast cancer the
female hormone plays an important role in the treatment of the breast cancer.

Now I’m not presenting this to you as technical information.  I’m presenting
this to you as my experience and what I can tell you about it.

We also had a doctor in Florida who was giving it to a pancreatic cancer
patient, last November.  He was dramatically losing weight.  He did not expect
him to survive.  So they were desperate for anything.  He took this for sixty
days and has now gained all his weight back and is doing just great today.
The doctor doesn’t understand it.  He is just totally blown away about how it
could happen because nobody survives pancreatic cancer.

This is not an anti-anything.  This is not anti-aids.  This is not anti-
cancer.  This is pro-life.  It literally is the spirit.  The material is not
here to cure aids.  The material is not here to cure cancer.  The material is
here to perfect our bodies.  It makes our bodies be in the state they are
supposed to be in.  It is our own immune system that fights and cures the
disease.  If you can correct your DNA at every cell in your body.  If you can
correct the damage that’s been done that brought about the cancer, if you can
correct the damage that has been brought about by the virus, the aids; you
literally will become a perfected being.  You will return back to the original
healthy state you were meant to be in.

This is not a medicine.  This material is, in fact, a philosophical material.
It is here to enlighten and to raise the consciousness of mankind.  If in
doing that it happens to cure diseases so be it.  It’s real hard for most of
us to understand that this is what it is all about.

We are just about at nine o-clock.  Tomorrow I will lay out all the physics
that has happened since I filed my patent.  I will lay out all the theories
about superconductivity and the high spin atoms.  We will come to see all the
published literature; I will put it up on the overhead projector where you can
read the credentials; Brookhaven National Laboratories, Oakridge National
Laboratories, the Niels Bohr Institute over in Copenhagen.  You will see all
the papers on superconductivity in the body.  You will see all the papers on
literally the light of life being the superconductor.  And we will discuss in
depth the zero point energy, the vacuum energy, space/time, gravity.  And I
will explain it to you, I think, clearly.  And all of you will walk out of
here with a pretty good understanding of what gravity and space/time really
is.  And how we are just a hologram; a picture show, ourselves.  We are not
reality; even ourselves.  Then we will go into the history of this from four
or five thousand BC to the Tigris-Euphrates valleys, Zachariah Sitchin papers,
to the Egyptian pharos and high priests.  To the Hebrews and the Bible.  To
the prophecies of Nostradamus, the Keys of Enoch; all the prophesies relating
to this material.  And the prophecy that it will be here by 1999; will be
known to science.  So that is the story.  We will see you tomorrow if you feel
like coming.
                              (end of transcript)

 Source:

http://www.eskimo.com/~billb/freenrg/hudson.txt